A grease trap gives fats and food solids time to separate from wastewater. As material accumulates, it can coat internal parts and make it harder for water to move through the trap. You might notice odors near the lid or water draining slowly from a sink. Cleaning removes the contents and addresses residue on the surfaces and openings. Call to describe the problem to a provider who serves your area.
Call (650) 480-3882 to reach a provider →
What cleaning involves beyond pumping
Pumping removes the contents of the trap, including the grease layer and settled solids. Cleaning also addresses material that clings to the inside.
Ask what the work includes and whether the receipt will describe the cleaning. A thorough job generally covers these areas:
- Scraping grease from the trap walls
- Removing residue from the lid
- Cleaning buildup from baffles
- Clearing the inlet and outlet openings
- Removing settled food solids from the bottom
Signs your trap needs cleaning
Changes around the sink or trap can mean grease and solids need attention. Watch for symptoms that persist or return during kitchen use:
- Standing water in the sink
- Slow drainage during dishwashing
- Odors around the trap lid
- Grease visible near the outlet
- Wastewater backing up into a sink
- Residue collecting around the lid
Note where and when the symptoms appear so you can describe the problem clearly.
Why skimming the top layer is not enough
The grease floating on top is only part of what collects in a trap. Food solids can settle at the bottom, while residue sticks to the walls and baffles.
Removing the surface layer leaves that material behind. Buildup around the inlet or outlet can still interfere with the movement of wastewater through the trap.
A full cleaning addresses the contents and the surfaces inside. Ask what will be removed and keep the receipt with your kitchen's other maintenance documents.
How often small under-sink traps need attention
An under-sink trap may need attention based on the amount of grease and food solids your kitchen sends through it. Cooking volume and dishwashing habits can affect how quickly material collects.
Your city or sewer district may set requirements for cleaning and records. Check the applicable schedule, keep service records and ask a provider how the trap's condition should inform future service.
What to do between cleanings
- Scrape food scraps into the trash before washing dishes.
- Collect used cooking oil in a designated container rather than pouring it down a drain.
- Wipe greasy pans and plates before they reach the sink.
- Watch for slow drainage, odors or water backing up around the trap.
- Keep service records where kitchen staff can find them.
These habits can reduce what enters the trap, though grease and solids will still need to be removed through cleaning.
What affects the price of a cleaning
The size and location of the trap can affect the work involved, as can the amount of grease and solids inside. Access matters too: equipment under a crowded sink or behind stored supplies may take more preparation. The scope of cleaning and how the removed material is handled can also affect the quote. Describe the setup and ask the provider what the quoted work includes.
Grease trap cleaning questions
Is grease trap cleaning the same as pumping?
Pumping removes the contents of the trap. Cleaning also addresses residue on internal surfaces and around openings. Ask whether the work includes scraping the walls, lid and baffles and clearing the inlet and outlet.
Can my staff clean the trap themselves?
That depends on the equipment and local requirements. Before assigning the work, check how the material must be handled and what records are required. Staff also need to know how to remove and replace the lid safely.
How long does a cleaning take?
The time depends on the trap's size, access and the amount of buildup. Tell the provider where the trap is located and what surrounds it, then ask how to plan around the work.
Will the kitchen need to close during cleaning?
That depends on the trap's location and which sinks or equipment drain into it. Ask the provider which fixtures need to stay out of use so you can plan kitchen work around the cleaning.